These battery monitors calculate the state of charge of a battery and keep track of the ampere hours consumed from the battery by integrating the current flowing in or out of the battery. 

They both come with a round head unit, a square bezel overlay, a screw ring for mounting, a 10m UTP RJ12 cable, a fused power supply cable and a 500A/50mV shunt. Because of the high voltage application, the shunt is housed in a special enclosure. 

The BMV-710H Smart has Bluetooth built-in and can connect wirelessly to your phone (or tablet) via the VictronConnect App to conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.

Features of the - Victron BMV-710H Smart Battery Monitor 

Battery ‘fuel gauge’, time-to-go indicator, and much more 

The remaining battery capacity depends on the ampere-hours consumed, discharge current, temperature and the age of the battery. Complex software algorithms are needed to take all these variables into account. 

Next to the basic display options, such as voltage, current and ampere-hours consumed, the BMV-700 series also displays state of charge, time to go, and power consumption in Watts. Bluetooth Smart Use the Bluetooth Smart dongle to monitor your batteries on Apple or Android smartphones, tablets, MacBook's and other devices. 

Easy to install 

All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ12 cable (10m) and battery cable with fuse (2m); no other components needed. 

Also included are a separate front bezel for a square or round display appearance, a securing ring for the rear mounting and screws for the front mounting. 

Easy to program (with your smartphone!) 

A quick install menu and a detailed setup menu with scrolling texts assist the user when going through the various settings. Alternatively, choose the fast and easy solution: download the smartphone app (Bluetooth Smart dongle needed) 

Standard features 

  •  Battery voltage, current, power, ampere-hours consumed and state of charge 
  • Remaining time at the current rate of discharge 
  • Programmable visual and audible alarm 
  • Programmable relay, to turn off non critical loads or to run a generator when needed 
  • 500 Amp quick connect shunt and connection kit 
  • Shunt selection capability up to 10,000 Amps 
  • Direct communication port 
  • Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health 
  • Wide input voltage range: 6.5 – 95V 
  • High current measurement resolution: 10 mA (0.01A) 
  • Low current consumption: 2.9Ah per month (4mA) @12V and 2.2Ah per month (3mA) @ 24V BMV-702 additional features 
  • Additional input to measure voltage (of a second battery), temperature or midpoint voltage, and corresponding alarm and relay settings. 

Other battery monitoring options 

  •  Lynx Shunt VE.Can 

 More about midpoint voltage 

One bad cell or one bad battery can destroy a large, expensive battery bank. When batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage. Please see the BMV manual, section 5.2, for more information. We recommend our Battery Balancer (BMS012201000) to maximize service life of series-connected batteries. 

PRODUCT CODE: BAM030712200R

Stock orders dispatched within 24 hours

TECHNICAL QUERIES 024 7639 3676

WE'LL MATCH ANY ONLINE PRICE

TOP

 

img

Added to cart successfully!